Two-Color Boat Registration Numbers
Bold contrast decals that make your registration number pop on any hull color — engineered for visibility, durability, and a professional finish on multi-hull and larger vessels.
Contrast & Visibility That Single-Color Can't Match
A contrasting fill and outline mean your registration numbers are readable from every angle, in every light condition — protecting you from fines and keeping your vessel looking sharp year after year.
Superior Contrast on Any Hull
Two-color designs separate the character fill from the outline, ensuring your registration numbers read instantly — regardless of whether your hull is white, black, dark blue, or gel-coated.
UV-Stabilized Inks That Last
Every two-color decal is printed with UV-stabilized pigments and laminated with a marine-grade overcoat. Colors hold vivid for 7+ years even in direct sun, saltwater spray, and extreme temperature swings.
Ideal for Multi-Hull & Larger Vessels
Catamarans, trimarans, and vessels over 26 ft have more hull real estate and often face faster-moving enforcement. Two-color numbers are visible from greater distances, meeting or exceeding every state's legibility requirements.
Professional Marina Appearance
Single-color decals blend into hull color. Two-color decals signal care and craftsmanship to marina staff, inspectors, and fellow boaters — a subtle yet impactful mark of professionalism.
Color Combinations, Fonts & Sizes
Every detail of your two-color registration number decal is configurable in our online tool — from the fill/outline color pair to character height and font style.
Color Combinations
White on Black
Black on Gold
Gold on Navy
White on Red
Navy on White
Red on Black
Need a custom color match? Browse the full color palette →
Font Styles
Block
Classic block lettering — most states' standard
Gothic
Bold and modern — high contrast readability
Serif
Traditional serif — timeless marina aesthetic
See all font options: Color & Font Options →
Character Height Options
Smaller crafts & personal watercraft
Standard requirement — most state registrations
Larger vessels & commercial craft
Extra-large for maximum visibility & compliance
Installation Guide
Two-color decals go on just like single-color vinyl — no special tools required. Follow these four steps for a bubble-free, professional result every time.
Clean & Measure the Application Area
Wipe the hull surface with isopropyl alcohol to remove wax, salt, and oils. Measure and mark a light pencil guideline so characters sit at the correct height and spacing — state regulations typically require a 3-inch clearance from the waterline.
Peel the Transfer Backing
Peel the paper backing at a 45° angle. If the vinyl clings to the liner, use a squeegee to burnish the decal from behind, then retry. Work in a shaded area to prevent the adhesive from activating prematurely.
Wet or Dry Application
For large characters (6" or 8"), a few drops of soapy water on the hull lets you reposition before final placement. For 3" and 4" characters, dry application is fine — simply align and press firmly from the center outward.
Squeegee, Peel Transfer Film & Cure
Use a squeegee (or credit card) to press firmly across the entire character, removing bubbles. Peel the transfer tape at 180° — low and slow. Allow 24–48 hours before the vessel contacts water for full adhesive cure.
Need more detail? Read our full installation guide →
Two-Color vs. Single-Color Decals
See exactly where two-color registration decals outperform their single-color counterparts — especially on larger and multi-hull vessels.
Looking for reflective options? View our reflective registration number decals →
What Boat Owners Are Saying
Hundreds of satisfied captains across the US trust our two-color registration decals for their vessels.
"My previous registration stickers were plain white on a dark hull and nearly invisible. Switched to two-color — black fill, gold outline — and the difference is night and day. Inspectors can read them from 50 feet away."
Marcus T.
Lake Tahoe, CA
Catamaran — 36 ft
"These decals survived a full Florida summer — direct sun, salt spray, humidity. Colors are still crisp after two seasons. The white-on-navy combo looks incredibly professional against my hull."
Diane R.
Miami, FL
Center Console — 28 ft
"I was skeptical vinyl would hold on a larger vessel, but the marine-grade material is legit. Installation was painless and the two-color look made my boat stand out at the dock. Ordering a second set for the other hull."
Ben O.
Outer Banks, NC
Trimaran — 42 ft
Frequently Asked Questions
Everything you need to know before ordering your two-color registration number decals.
More questions? Visit our full FAQ page →
Design Your Two-Color Registration Numbers Today
Choose your color combination, font, and character height in our online customizer. Preview your numbers live, then order — ships in 2–3 business days with free shipping on orders over $50.